Smoke Control Dampers
Aerodynamic double skin blades for minimum flow resistance.
Designed to withstand 300oC for 1 hour.
High temperature seals for minimal leakage.
Linkage system for opposed blade operation.
Actuators available for 300oC operation.
Galvanised steel blades and casing.
Application
Type ADS-01 Smoke control dampers are designed for use in smoke ventilation
systems. They incorporate seals for minimum blade leakage and will withstand
a temperature of 300oC for 1 hour.
Construction
Rega 165ADLS rectangular smoke control dampers comprising, 165mm wide aerofoil
section galvanised steel blades with high temperature silicon edge seals
and external linkage for opposed blade operation. The blades are fitted
with 12mm stub axles running in brass bearings. Frames 1.2mm galvanised
steel 185mm deep fitted with galvanised steel top and bottom stops and sprung
stainless steel side seals.
Range
Available as standard in galvanised steel, with the option of stainless
steel for corrosive temperature conditions. Single module size 1200 wide
x 2000mm high with no limit to size with multi-module units.
|
